Photo to Gacha Capsule Figure

Create a macro product photograph of a pose-accurate, semi-deformed PVC figure inside a clearly visible pink-and-clear gacha capsule.

도지마의 유부남 Republished on Oct 29 0 Bookmarks 0 Copies
Bookmark 0

Example outputs

Example result for Photo to Gacha Capsule Figure
Example result for Photo to Gacha Capsule Figure

Prompt template

Format
Text
Inputs
uploaded_photo (image) · Required
Outputs
gacha_capsule_product_photo (image)
TASK
Turn the subject or subjects in the uploaded photo into mass-produced capsule-toy (gacha) PVC figures sealed inside round plastic gacha capsules.
This is a NEW image generation, not an edit of the photo. Use the photo only as a reference for pose, body, face, hair, outfit, and accessories.
The result must look like TOY FIGURES inside clearly visible plastic gacha capsules, photographed on a table—never like real people shrunk down or placed inside glass balls.

POSE_LOCK
Each figure must reproduce its subject's pose EXACTLY: body orientation, head tilt and direction, gaze, arm and hand positions, finger shapes, leg stance, weight distribution, and any objects held in the hands.
Every joint angle stays the same as in the photo. All contact points stay the same (hand touching face, arm resting on knee, hands holding objects, etc.), even after the proportions change.
Do not straighten, simplify, mirror, or “improve” the pose.
If parts of the body are cropped out of the photo, complete them naturally so the figure is full-body, matching the visible pose.

PROPORTIONS
Use semi-deformed figure proportions: about 4.5 heads tall.
The head is noticeably larger than real life; the torso, arms, and legs are shortened, but limbs keep their natural shape, slimness, and joints.
NOT chibi, NOT super-deformed, NOT 2–3 heads tall, and no stubby or round limbs.
Hands and feet are scaled to match the new body, not oversized.
The proportions apply uniformly to the whole figure; the pose itself does not change.

IDENTITY_LOCK
The figure's face must still be recognizable as the person in the photo, even though it is rendered in a very simple toy style.
Likeness comes from SHAPE and LAYOUT, not detail: keep the exact outline shape, size, spacing, and relative position of the eyes, nose, and mouth, as well as the eyebrow angle. Do not beautify, average, or symmetrize.
Keep the facial expression, hairstyle silhouette, hair color, outfit, colors, patterns, and accessories from the photo.
If a subject is an animal, keep it as that animal. Never turn an animal into a human.

SIMPLE_FACE
Give the face a simple capsule-toy appearance with minimal detail:
EYES: Flat pad-printed shapes in 2–3 solid colors, following the photo's eye outline, with one small white highlight dot. No individual eyelashes, iris texture, or eyelid creases beyond one thin line if needed.
BROWS: One simple painted stroke each.
NOSE: A tiny, smooth sculpted bump only; no nostrils or painted shading.
MOUTH: One simple flat painted shape in a single color; no lip texture or gloss.
CHEEKS: Optional faint, flat blush; no gradients.
The face surface is smooth plastic with almost no sculpted detail, like a typical mass-produced gacha figure.

TOY_FIGURE_LOOK
Every surface must read as factory-made plastic:
HAIR: Sculpted as solid molded plastic chunks and clumps with smooth grooves, like a cast figure. No individual strands, flyaways, or real hair texture.
SKIN: Smooth, uniform plastic with no pores, skin texture, or makeup gradients.
CLOTHES: Molded plastic with simplified, slightly thick folds. Suggest fabric textures and patterns only with flat paint and shallow sculpted lines, not real weave, sheen, or embroidery.
PAINT: Flat factory paint with crisp edges, very slight overspray at color borders, and a satin-to-matte finish.
DETAILS: Visible small part seams (neck, wrists, hair joint), and slightly rounded, thick edges on thin parts such as fingers, hair tips, and held objects, as on real capsule toys.
The figure has NO display base. Its own feet, knees, hips, or hands—whatever touches the ground in the photo's pose—rest directly on the curved inner bottom of the capsule.

CAPSULE
Each capsule must be clearly visible and instantly read as a cheap injection-molded plastic gacha capsule, NOT a glass bowl, glass dome, fishbowl, or soap bubble.
STRUCTURE: Exactly two equal hemispheres meeting at the exact horizontal middle (equator). Both halves are separate molded plastic parts.
WALL: Thick plastic shell (about 1.5 mm), with wall thickness visible as bright rim lines along the silhouette edges and at the seam.
TOP HALF: Clear transparent plastic, but clearly present: strong glossy plastic highlights, a visible outline edge, slight plastic tint, and faint molding marks.
BOTTOM HALF: Tinted pink translucent plastic, like pink candy-colored acrylic. The pink tint is UNIFORM over the ENTIRE bottom hemisphere: edges, sides, AND the front center directly in front of the figure. It never fades to clear anywhere.
Everything below the equator (the figure's lower body, legs, skirt, and feet) is seen THROUGH the pink plastic, so it appears clearly pink-tinted and slightly hazy, never in its true colors.
The boundary between clear and pink is one sharp horizontal line exactly at the seam, running all the way around the front.
SEAM: A raised snap-fit band at the equator, where the pink lip overlaps the clear lip, with a small molded hinge tab on one side and a small pull tab on the opposite side.
TOP POLE: A small round molded vent hole at the very top of the clear half.
INSIDE: The inner bottom is only the smooth curved inside wall of the pink hemisphere. Nothing else is inside except the figure: no base, floor, disk, shelf, paper, card, or liquid.
SIZE: Each figure, including anything it holds, takes up about two-thirds of its capsule's height, leaving clear empty space between the top of the figure and the top of the capsule, and on both sides.
Scale the ENTIRE posed figure down uniformly to achieve this. Never bend, crop, or alter the pose to make it fit.
Each capsule sits on the table on its round bottom with a soft contact shadow.

SCALE_CUE
Each capsule is palm-sized (about 7–8 cm across). Place a few ordinary coins and one or two other fully closed gacha capsules (both halves present, same structure) on the table next to it so the small size is obvious.

MULTIPLE_SUBJECTS
If the photo contains more than one person or animal, give each one its own capsule, lined up side by side, each keeping its own pose from the photo.

SCENE
Create a macro product photo of the capsules on a tabletop, with a capsule vending machine softly out of focus in the background.
Use soft studio lighting and shallow macro depth of field, with focus on each figure's face inside its capsule.

FORBIDDEN
No clear window or fade in the pink half: the pink tint must not disappear in the middle or in front of the figure. No part of a figure below the seam is shown untinted.
No display base, clear disk, flat floor plate, inner shelf, or inner bowl inside the capsule.
No paper, card, insert, leaflet, or picture inside the capsule.
No photorealistic humans: no real skin texture, individual hair strands, real fabric weave, or realistic makeup.
No detailed faces: no eyelashes, iris detail, nostrils, lip texture, or makeup shading.
No glass look: no glass bowl, glass dome, fishbowl, crystal ball, or bubble. No invisible or ultra-thin shell.
No liquid or filling inside the capsule. No opaque bottom half. No seam below the middle.
No text, logos, brand names, or watermarks anywhere.
No chibi conversion, changed poses, changed outfits, extra people, or figures touching or pressing against the tops of the capsules.

What you'll create

The source subjects become manufactured toy figures enclosed in clearly visible round plastic capsules on a table. Matching poses, outfits and accessories preserve recognition without depicting real people trapped in spheres.

Frequently asked questions

Are the figures miniature humans?

No. They must visibly read as mass-produced PVC toys.

Can the pose change for cuteness?

No. Each reference pose is reproduced exactly without chibi conversion.

Comments

Tried this prompt? Share what you made, compare results, or ask a question

Up to 4 results. Images up to 2 MB; MP4, WebM, or MOV videos up to 4 MB each